About This Item
High-Performance Camping Cord Technical Specifications
| Color | Min. Break Strength | Diameter | Elongation at Break | Yield (ft/lb) |
|---|---|---|---|---|
| White | 250 lb min. | 0.0563" (1.43 mm) | 5.8% | 2,610 |
| Black | 250 lb min. | 0.0563" (1.43 mm) | 5.8% | 2,610 |
Made from 100% UHMWPE fiber; black cord uses solution-dyed fiber. Break strength shown is the minimum. Diameter, elongation and yield are typical values.
Physical Properties & Performance
This cord is braided from 100% UHMWPE fiber, so it carries the fiber's exceptional strength at very low weight – it is lighter than water – into a flexible braided line with low stretch.
Break Strength
Holds heavy loads at very low weight
Modulus
Very stiff; minimal stretch under load
Elongation
Low stretch to break; holds dimensions
Strength : Weight
High strength at low density
Creep
Creeps under sustained load; size for long-term loads
Impact / Toughness
Absorbs impact energy without shattering
UHMWPE Performance Highlights
- Braided from 100% UHMWPE fiber
- Exceptional strength-to-weight ratio; lighter than water
- Low stretch in a flexible braided construction
- Absorbs virtually no moisture – suited to marine and outdoor use
- Solution-dyed black braids will not bleed color
High-Performance Camping Cord Resistance Guide
UHMWPE fibers like Spectra® or Dyneema® offer high resistance to corrosive substances, such as most acids, alkalis, and organic solvents, making them valuable in industrial settings where chemical exposure is commonplace. However, UHMWPE fibers are not without their shortcomings. They exhibit limited thermal stability, which reduces their performance and longevity at elevated temperatures. While their melting point is approximately 144–152 °C, they begin to lose their properties around 100 °C. Moreover, UHMWPE fibers possess low flame resistance. In a fire or high-heat scenario, they readily melt and burn.
Abrasion
Excellent wear resistance in rubbing contact
Ultraviolet
Holds up well in sunlight
Flame
Not flame resistant
High Heat
Softens and melts at low temperatures
Sub-Zero
Keeps strength and flexibility below freezing
Cryogenic
No embrittlement at cryogenic temperatures
Chemical
Resists most acids, alkalis and solvents
Moisture Regain
Absorbs virtually no moisture
Operating Temperatures
Chemical Compatibility
Product Details
- Made in the USA
- Braided from 100% UHMWPE fiber
- Flat braid built for strength and abrasion resistance
- Water- and UV-resistant; floats
- Splice-free, one continuous length per reel
- Longer and custom lengths on request
Suggested Applications
Need Something Custom?
Rocket-Fibers works with engineers, manufacturers, and R&D teams on custom fiber solutions, sourcing requests, and technical guidance.
- Custom cut lengths
- Alternative & oversized sizings
- Low minimum order quantities
- Batch COA with lot traceability
