Fiber Materials

Types of Fiber Materials

Sort and compare our high-performance fibers.

Para-Aramid
Meta-Aramid
UHMWPE
LCP
Carbon
PBI
Aramid · Para-aramid

Kevlar®

Best for: Cords and ropes, tethers, protective gear, composites, sewing thread

  • Very high strength for its weight
  • Doesn’t melt — holds up to high heat and flame
  • Low creep and high toughness under long-term load
Keep in mind: Weakens with long UV (sunlight) exposure — protect it outdoors
Shop all Kevlar® →
Aramid · Para-aramid copolymer

Technora®

Best for: Ropes, cable and hose reinforcement, industrial textiles

  • Very high strength and stiffness
  • Excellent abrasion resistance
  • Absorbs less moisture than standard para-aramid
Keep in mind: Sensitive to UV (sunlight) exposure — protect it outdoors
Shop all Technora® →
Aramid · Para-aramid

Alkex®

Best for: Cords, reinforcement, an alternative para-aramid source

  • High strength for its weight
  • Doesn’t melt — holds up to high heat and flame
  • Low creep under sustained load
Keep in mind: Sensitive to UV (sunlight) exposure — protect it outdoors
Shop all Alkex® →
Aramid · Meta-aramid

Nomex®

Best for: Flame-resistant apparel, sewing thread, heat protection

  • Excellent flame resistance — doesn’t melt or drip
  • Holds up to continuous high heat
  • Stays stable from sub-zero to cryogenic temperatures
Keep in mind: Much lower strength for its weight than para-aramids — not a load-bearing fiber
Shop all Nomex® →
UHMWPE · Honeywell fiber

Spectra®

Best for: Marine and fishing lines, cut-resistant products, braids

  • Highest strength for its weight
  • Excellent abrasion, UV and chemical resistance
  • Doesn’t absorb water — performs wet and in the cold
Keep in mind: Low melting point (144–152 °C / 291–306 °F) — not for high-heat use
Shop all Spectra® →
UHMWPE · Ultra-high-molecular-weight polyethylene

UHMWPE

Best for: Braids and cords, outdoor and utility lines, cut resistance

  • Highest strength for its weight
  • Excellent abrasion, UV and chemical resistance
  • Doesn’t absorb water — performs wet and in the cold
Keep in mind: Low melting point (144–152 °C / 291–306 °F) — not for high-heat use
Shop all UHMWPE →
LCP · Liquid crystal polymer

Vectran™

Best for: Tethers, aerospace lines, cables, inflatable structures

  • Very low creep — holds tension over time
  • Excellent abrasion and chemical resistance
  • Doesn’t absorb moisture
Keep in mind: Sensitive to UV (sunlight) exposure — protect it outdoors
Shop all Vectran™ →
Carbon · Carbon fiber tow

Carbon

Best for: Composites, stiff lightweight parts, reinforcement

  • Very high stiffness (modulus)
  • Low creep with excellent chemical and UV resistance
  • Holds up to high heat
Keep in mind: Brittle — low impact toughness, so it can fracture under sharp impact
Shop all Carbon →
Specialty · Polybenzimidazole

PBI

Best for: Flame-resistant blends, protective apparel, heat barriers

  • Excellent flame resistance (LOI > 41%)
  • Holds up to very high heat
  • Stays stable from sub-zero to cryogenic temperatures
Keep in mind: Low strength and high moisture regain — not a structural fiber
Shop all PBI →