About This Item
Chopped PBI Technical Specifications
| Cut Length | Denier per Filament | Tenacity (g/d) | Elongation at Break | Moisture Regain | Color | Finish |
|---|---|---|---|---|---|---|
| 1/8" (3.2 mm) | 1.5 (1.7 dtex) | 2.7 (2.4 dN/tex) | 27% | 15% | Gold | 0.35% |
| 1/4" (6.4 mm) | 1.5 (1.7 dtex) | 2.7 (2.4 dN/tex) | 27% | 15% | Gold | 0.35% |
Standard cut lengths per the PBI Performance Products technical bulletin; other cut lengths available on request. A batch-specific Certificate of Analysis (COA) with full lot traceability is available on request.
Physical Properties & Performance
PBI (polybenzimidazole) is a heat- and flame-resistant fiber rather than a load-bearing one. It has modest tensile strength and stiffness, high elongation, and keeps its integrity at temperatures where most organic fibers fail.
Break Strength
Limited load capacity
Modulus
Low stiffness
Elongation
Higher stretch; absorbs shock loads
Strength : Weight
Low strength for its weight
Creep
Some creep under long-term load
Impact / Toughness
Moderate impact resistance
PBI Performance Highlights
- Inherently flame resistant; will not melt, drip or support combustion
- Retains mechanical integrity at temperatures where most organic fibers degrade
- Very high Limiting Oxygen Index (LOI > 41%)
- Thermal stability and dimensional retention in continuous high heat
- Resists chemical exposure and long-term thermal aging
Chopped PBI Resistance Guide
PBI does not melt or drip and has one of the highest Limiting Oxygen Index (LOI) values of any organic fiber. It resists most chemicals and long-term thermal aging. Its limitations are moisture regain and slow degradation under prolonged UV exposure.
Abrasion
Protect from rubbing contact
Ultraviolet
Protect from sunlight; jacket or overbraid outdoors
Flame
Self-extinguishes; will not melt or drip
High Heat
Retains strength at elevated temperatures
Sub-Zero
Keeps strength and flexibility below freezing
Cryogenic
No embrittlement at cryogenic temperatures
Chemical
Resists many chemicals; see compatibility below
Moisture Regain
Absorbs significant moisture; store sealed and dry
Operating Temperatures
Chemical Compatibility
Product Details
- Made in the USA
- 100% polybenzimidazole (PBI) fiber
- Berry Amendment compliant
- Precision cut for consistent length
- Supplied clean and binder-free
- Natural gold color (black per manufacturer, on request)
- Custom cut lengths on request
PBI Properties Table
| Property | Unit | Value |
|---|---|---|
| Denier per Filament | denier (dtex) | 1.5 (1.7) |
| Tenacity | g/d (dN/tex) | 2.7 (2.4) |
| Elongation at Break | % | 27 |
| Initial Modulus | g/d (dN/tex) | 45 (40) |
| Specific Gravity | — | 1.4 |
| Moisture Regain, 68 °F (20 °C), 65% RH | % | 15 |
| Boiling Water Shrinkage | % | < 1.0 |
| Hot-Air Shrinkage, 400 °F (205 °C) | % | < 1.0 |
| Limiting Oxygen Index | % | > 41 |
| Finish Content | % | 0.35 |
| Specific Heat | BTU/lb·°F (kJ/kg·K) | 0.3 (1.3) |
| Thermal Conductivity | BTU/hr·ft·°F (W/m·K) | 0.022 (0.038) |
| Surface Resistivity, 70 °F (21 °C), 65% RH | ohms/square | 1 × 10¹⁰ |
| Color | — | Gold, black |
Typical values per the PBI Performance Products technical bulletin, "Properties of PBI Fiber." Typical values are not a product specification.
Suggested Applications
Need Something Custom?
Rocket-Fibers works with engineers, manufacturers, and R&D teams on custom fiber solutions, sourcing requests, and technical guidance.
- Custom cut lengths
- Alternative & oversized sizings
- Low minimum order quantities
- Batch COA with lot traceability